基于UG软件的航空发动机液压系统执行机构设计

介绍了用UG软件进行航空发动机液压系统执行机构壳体油路设计、油路检查、装配应用和设计说明等的方法。     

自动铺丝轨迹理论铺放角度偏差算法

铺放角是复合材料铺层设计的重要参数,在对铺层进行轨迹规划时采取不同的规划算法可能会导致轨迹角度偏离设计角度。本文从轨迹的方向性和可铺放性对固定角度法和测地线法进行了对比分析,在此基础上研究了复合材料自动铺丝轨迹的理论铺放角度偏差,提出了计算理论铺放角度偏差的几何算法,并基于Visual Studio 2010平台,应用CATIA二次开发技术实现了理论铺放角度偏差的计算。最后通过计算复合材料截锥壳45°测地线轨迹的铺放角度偏差验证了角度偏差算法的可行性、可靠性、实用性与高效性。     

Experimental study of an insert and its influence on churning losses in a high-speed electro-hydrostatic actuator pump of an aircraft

The speed of an Electro-Hydrostatic Actuator (EHA) pump can recently reach 20000 r/min, and its churning losses increase obviously with an increasing speed, which results in low efficiency and thus increasing heat in aircraft EHA systems. In order to reduce churning losses at high speeds, more attention should be given to the design of an insert. In this paper, the effect of an insert with different design parameters on churning losses is investigated through Computational Fluid Dynamics (CFD) simulation and experiments by calculating the difference between churning losses torques of the test pump with and without the insert based on a high-speed churning losses test rig. Analytical results show that the gap between the insert and the cylinder is critical for churning losses reduction. It is found that the churning losses of the test pump can be reduced with a decreasing gap between the cylinder block and the insert at high speeds. This is because the insert can decrease the turbulence occurrence at high speeds. The results can be used for flow field analysis and optimization of the high-speed EHA pump and provide a new method for improving efficiency of high-speed EHA pumps.     

某型飞机空中飘摆故障分析及防护措施

分析某型飞机平尾助力器故障导致飞机在空中飞行时产生飘摆现象的原因,提出修理改进措施及维护对策。     

Influence and optimization of parameters of prepreg viscosity during placement

This paper tested the viscosity of prepreg in the automatic placement process, and conducted the probe and placement-90° peel tests through the test systems. The law of variation of prepreg viscosity during the laying process was studied through these tests under different conditions by taking the peel force to intuitively and quantitatively characterise the viscosity of the prepreg.The results show that this viscosity is inversely proportional to the laying rate, proportional to the laying pres...     

Effect of variable-angle trajectory structure on mechanical performance of CF/PEEK laminates made by robotic fiber placement

In comparison to the traditional fixed-angle trajectory, the variable-angle trajectory has a greater design space. However, it is a challenge to determine which common design curve structure is the most effective for improving mechanical performance. This work explores the effects of various design curves such as fixed-angle curve, linear curve, arc curve, sine curve, Bezier curve, and cubic polynomial curve trajectories on mechanical performance of laminates, including vibration modal performance and buckling performance. Genetic algorithm and improved NSGA-II algorithm are then used to optimize various curve structures. The results are confirmed utilizing thermoplastic Carbon Fiber (CF)/Polyether-Ether-Ketone (PEEK) laminates made by robotic fiber placement experiments. The relationship model between different mechanical performance and curve design variables is established. The optimization of variable-angle structure with mechanical properties as input variables is achieved. Meanwhile, a full-process angle-variable laying software platform from trajectory planning (CAD), trajectory optimization to manufacturing (CAM) is developed for facilitating the fiber placement application.     

Active fault tolerant control for vertical tail damaged aircraft with dissimilar redundant actuation system

This paper proposes an active fault-tolerant control strategy for an aircraft with dissim-ilar redundant actuation system (DRAS) that has suffered from vertical tail damage. A damage degree coefficient based on the effective vertical tail area is introduced to parameterize the damaged flight dynamic model. The nonlinear relationship between the damage degree coefficient and the corresponding stability derivatives is considered. Furthermore, the performance degradation of new input channel with electro-hydrostatic actuator (EHA) is also taken into account in the dam-aged flight dynamic model. Based on the accurate damaged flight dynamic model, a composite method of linear quadratic regulator (LQR) integrating model reference adaptive control (MRAC) is proposed to reconfigure the fault-tolerant control law. The numerical simulation results validate the effectiveness of the proposed fault-tolerant control strategy with accurate flight dynamic model. The results also indicate that aircraft with DRAS has better fault-tolerant control ability than the traditional ones when the vertical tail suffers from serious damage.     

超低空空投航迹倾角自适应跟踪控制

针对超低空空投下滑阶段考虑执行器输入死区、不确定性大气扰动以及模型存在未知非线性等因素干扰轨迹精确跟踪等问题,提出了一种自适应神经网络动态面跟踪控制方法.建立了含执行器输入死区的超低空空投载机纵向非线性模型,采用神经网络逼近模型中未知非线性函数,引入非线性鲁棒补偿项消除了执行器死区建模误差和外界扰动.应用Lyapunov稳定性理论证明了闭环系统所有信号均是有界收敛的.仿真验证表明,所提方法既保证了轨迹跟踪的精确性,又具有强鲁棒性.     

某型航空发动机加速性故障分析

某型发动机台架试车检查加速性时,出现加速时间过长故障。通过故障定位、机理分析和排除,得出该型发动机排气温度限制系统异常,对发动机加速性有一定影响。该故障案例为排除发动机加速性故障提供了一种新思路。     

超磁致伸缩电静液作动器磁场分析与优化

提出一种超磁致伸缩电静液作动器（GMEHA）结构,采用永磁体与控制线圈组合提供驱动磁场.首先建立了该组合磁路数学模型,并给出了超磁致伸缩棒内磁感应强度计算解析式;其次,对以上结构进行了有限元分析（FEA）,得出了磁路主要结构参数与磁场分布均匀性之间映射规律;最后进行了作动器磁场试验研究并与有限元分析结果进行了对比,验证了理论与有限元模型的可预测性,给出了该电静液作动器结构设计方法.结果表明:该电静液作动器的最佳驱动频率为250Hz,最大无负载体积流量为0.85L/min,最大阻断力达到了120N.